LiFePO4 Battery |
MODEL | LP16-2450 | LP16-24100 | LP16-24200 | LP16-4850 | LP16-48100 | LP16-48200 | |
Nominal Voltage | 25.6V | 51.2V | ||||||
Nominal Capacity | 50Ah | 100Ah | 200Ah | 50Ah | 100Ah | 200Ah | ||
Nominal energy | 1280Wh | 2560Wh | 5120Wh | 2560Wh | 5120Wh | 10240Wh | ||
Life Cycles | 4000+(80% DoD for effectively lower total of ownership cost) | |||||||
Recommended Charge Voltage | 29.2V | 57.6V | ||||||
Recommended Charge Current | 10A | 20A | 40A | 10A | 20A | 40A | ||
End Of Discharge Voltage | 22V | 44V | ||||||
Standard Method | Charge | 10A | 20A | 40A | 10A | 20A | 40A | |
Discharge | 25A | 50A | 100A | 25A | 50A | 100A | ||
Maximum Continuous Cument |
Charge | 50A | 100A | 100A | 50A | 100A | 100A | |
Discharge | 50A | 100A | 100A | 50A | 100A | 100A | ||
BMS Cut-Off Voltage | Charge | <29.2V(3.65V/Cell) | <58.4V(3.65V/Cell) | |||||
Discharge | >22.0V(2s)(2.75V/Cell) | >44.0V(2s)(2.75V/Cel) | ||||||
Temperature | Charge | -4~113℉(0~45℃) | ||||||
Discharge | -4~131℉(-20~55℃) | |||||||
Storage Temperature | 23~95F(-5~35℃) | |||||||
Shipment voltage | ≥251.2V | |||||||
Module Parallel | Up to 15 units | |||||||
Communication | CAN2.0/RS232/RS485 | |||||||
Case Material | SPPC | |||||||
Dimension(LxWxH) | 340x400x140 mm 13.4x 19.3x8.3" |
450x400x 140 mm 27.5x19.3×8.3" |
450x395 x224 mm 27.5x 19.2x8.8" |
450x400x140 mm 17.7x15.7x5.5" |
580x400x145 mm 22.8x 15.7x5.7" |
580x490×250 mm 22.8x19.3x9.86" |
||
Approx. Weight | 30.4lbs (13.8kg) | 50.7lbs (23kg) | 99lbs(45kg) | 50.71bs(23 kg) | 97lbs(44kg) | 180.78 lbs(82 kg) | ||
Charge Retention And Capacity Recovery Capabllity |
Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥290%, Recovery rate of charge≥90 |
Contact Us at Any Time